-
Feeds
Sage Archive
-
![[UPDATE 15 JULY 2011] Since last night, the greenhouse is back online again. The Xbee radio’s have been reconfigured, although the greenhouse radio is not an End-Device as expected, because...](http://www.sindono.com/wp/wp-content/themes/arras/images/thumbnail.png "SAGE offline temporarily – UPDATE")
SAGE offline temporarily – UPDATE
Posted on June 28, 2011 | 4 Comments[UPDATE 15 JULY 2011] Since last night, the greenhouse is back online again. The Xbee radio’s have been reconfigured, although the greenhouse radio is not an End-Device as expected, because... -
Follow @SageBySindono to see how the greenhouse is doing
Posted on June 15, 2011 | No CommentsAs of now, the greenhouse sends out tweets on its own account: @SageBySindono. It will tell the world when it gets too hot or cold for the plants inside (currently... -
Reallife data from the greenhouse
Posted on June 13, 2011 | 1 CommentBelow is the logged sensor data from the greenhouse from the past 4 days. The graphs are powered by the Pachube feed. -
Project G3H becomes: SAGE
Posted on June 13, 2011 | No CommentsIn the past we referred to this experiment as ProjectG3H. Which was short for Project GGGH, which in turn was short for Project “Gyro Gearloose’s GreenHouse”. It was inspired by... -
New exciting service:ThingSpeak
Posted on February 18, 2011 | No CommentsToday, I learned about ThingSpeak on the AdaFruit website. It looks to be a new, open service to enable all kinds of devices to communicate with the cloud. On top... -
New prototype online: Wireless sensor data
Posted on October 30, 2010 | No CommentsSince 24 hours ago, a new prototype is online! It consists of two Arduino units, each equipped with an Xbee shield and an Xbee Series 2 radio in API mode.... -
Quick note: Xbee Api Mode Success!
Posted on October 20, 2010 | No CommentsJust a quick post to share with you that I have been able to get two Arduino’s exchanging data wirelessly using Xbee shields and an Xbee Series 2 module connected... -
Relay modules arrived!
Posted on October 6, 2010 | No CommentsA few days ago, I bought 4 relay modules from yerobot.com (the modules are made by dfrobot.com). And today, they arrived! I can’t wait to get these hooked up to... -
Stacking an Arduino, Ethernet shield and an Xbee shield
Posted on October 5, 2010 | 11 CommentsAs part of “Project G3H“, want the greenhouse to operate stand-alone, but also be able to log data on a remote server. To achieve this, the greenhouse will be monitored... -
Resources on setting up XBee radio’s
Posted on September 14, 2010 | No CommentsSetting up XBee radio’s (Series 2), can be a bit tricky. But, with the help from Google and Twitter, there are some great resources to be found. I just saw...
